Makita TW007G Instruction Manual
Hide thumbs
Also See for TW007G:
- Instruction manual (105 pages) ,
- Instruction manual (80 pages) ,
- Instruction manual (97 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita TW007G
Summary of Contents for Makita TW007G
- Page 1 INSTRUCTION MANUAL Cordless Impact Wrench TW007G TW008G Read before use.
-
Page 2: Specifications
Be sure that you understand their Noise meaning before use. Read instruction manual. The typical A-weighted noise level determined accord- ing to EN62841-2-2: Model TW007G Only for EU countries Ni-MH Sound pressure level (L ) : 97 dB(A) Li-ion... -
Page 3: Ec Declaration Of Conformity
The vibration total value (tri-axial vector sum) deter- mined according to EN62841-2-2: Electrical safety Model TW007G Power tool plugs must match the outlet. Never Work mode: impact tightening of fasteners of the maxi- modify the plug in any way. Do not use any... - Page 4 Remove any adjusting key or wrench before Maintain power tools and accessories. Check for turning the power tool on. A wrench or a key left misalignment or binding of moving parts, break- attached to a rotating part of the power tool may age of parts and any other condition that may affect the power tool’s operation.
- Page 5 It will Avoid storing battery cartridge in a con- tainer with other metal objects such as also void the Makita warranty for the Makita tool and nails, coins, etc. charger. Do not expose battery cartridge to water or rain.
-
Page 6: Functional Description
To install the battery cartridge, align the tongue on the Tips for maintaining maximum battery cartridge with the groove in the housing and slip battery life it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator as Charge the battery cartridge before completely dis- shown in the figure, it is not locked completely. - Page 7 Lighting up the front lamp Indicator lamps Remaining capacity CAUTION: Do not look in the light or see the Lighted Blinking source of light directly. 75% to 100% 50% to 75% 25% to 50% 0% to 25% Charge the battery. The battery may have malfunctioned.
- Page 8 Reversing switch action ► 1. Reversing switch lever CAUTION: Always check the direction of rotation before operation. CAUTION: Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may dam- age the tool.
-
Page 9: Changing The Application Mode
Changing the application mode Changing the impact force You can change the impact force in four steps: 4 (max), 3 (hard), 2 (medium), and 1 (soft). This allows a tightening suitable to the work. The level of the impact force changes every time you press the button You can change the impact force within approximately one minute after releasing the switch trigger. - Page 10 Changing the application mode This tool employs several easy-to-use application modes for driving bolts with good control. The type of the application mode changes every time you press the button You can change the application mode within approximately one minute after releasing the switch trigger. NOTE: You can extend the time to change the application mode approximately one minute if you press the button Application mode Feature...
- Page 11 This tool is equipped with an electric brake. If the tool consis- tently fails to quickly cease to function after the switch trigger is released, have the tool serviced at a Makita service center. ASSEMBLY ► 1. Impact socket 2. O-ring 3. Pin...
- Page 12 Tool with the detent pin Installing hook Model TW008G For tool with light fit detent pin CAUTION: When installing the hook, always secure it with the screw firmly. If not, the hook may come off from the tool and result in the personal injury.
-
Page 13: Operation
Proper fastening torque for high tensile bolt with OPERATION max impact mode (4) N•m CAUTION: Always insert the battery cartridge (kgf•cm) all the way until it locks in place. If you can see the red indicator, it is not locked completely. Insert it fully until the red indicator cannot be seen. -
Page 14: Maintenance
Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION:... - Page 16 Jan-Baptist Vinkstraat 2, Makita Europe N.V. 3070 Kortenberg, Belgium 3-11-8, Sumiyoshi-cho, Makita Corporation Anjo, Aichi 446-8502 Japan 885870A222 www.makita.com 20210329...