Table 1. Server Specifications (continued)
Specification
Processor (depending on the
model)
Memory
Drive
M.2 drive
PCI expansion slots
ThinkSystem SR150 Maintenance Manual
2
Description
• Support up to one Intel® multi-core processor from Core™, Pentium® , Celeron®
and Xeon® E processor family
– Designed for LGA 1151 sockets
– Scalable up to 6 cores
– Support up to 80W
For a list of supported processors, see:
index.shtml
.
See "Memory module installation order" in Setup Guide for detailed information
about memory configuration and setup.
• Slots: 4 dual inline memory module (DIMM) connectors
• Type: Error correcting code (ECC) DDR4 unbuffered DIMM (UDIMM)
• Capacity:
– Minimum capacity: 8 GB (1 x 8 GB)
– Max capacity: 128 GB (4 x 32 GB)
Note: 32GB DIMM is supported by Intel
ISE114H Ver. 2.00 or later.
Depending on the configuration, server supports up to four or two drives
• Four-drive backplate:
– Four 3.5-inch simple-swap SAS/SATA drives
– Four 2.5-inch simple-swap SAS/SATA drives (with 3.5-inch drive tray)
• Two-drive backplate:
– Two 3.5-inch simple-swap SATA drives
– Two 2.5-inch simple-swap SATA drives (with 3.5-inch drive tray)
Note: When the fourth SATA drive is installed, the M.2 drive is not supported.
Supports two different physical sizes of M.2 drives
• 42 mm
• 80 mm
Note: When the fourth SATA drive is installed, the M.2 drive is not supported.
• Slot 1: PCI Express 3.0 x8
• Slot 2: PCI Express 3.0 x8 (x16 mechanical connector with x8 signal)
Notes:
• ThinkSystem SR150 does not support ARI/SR-IOV
• QLogic QL41262 PCIe 25Gb 2-Port SFP28 Ethernet Adapter does not support
shared storage V3700v2 and V5030 configurations.
https://static.lenovo.com/us/en/serverproven/
®
Xeon
®
E processor family with UEFI