Canon GP335 Service Manual page 261

Hide thumbs Also See for GP335:

3. Changing the Deck Paper Size

If the deck paper size needs to be changed

to suit the needs of the user, perform the

1) Open the compartment of the deck, and

remove any paper.

2) If the lifer of the paper deck is up, turn on

the copier's power switch, and press the

sensor lever [2] of the paper supply

position sensor inside the compartment

[1] to move the lifter to its lower limit.

Figure 8-319

3) Remove the screw [3], and mount the

4) Remove the screw [5] (one each), and

5) Enter the new paper size in the copier's

CHAPTER 8 PAPER DECK

paper trailing edge guide plate [4] to suit

the new paper size.

mount the left and right guide plates [6] to

suit the new paper size.

Figure 8-320

service mode (OPTION>ACC>DK-P).

Chapters

Gp405 Gp405sm