Electrical System - Canon GP335 Service Manual

Hide thumbs Also See for GP335:

8. Position of the Deck Pick-Up Roller

Releasing Solenoid

Before removing the deck pick-up roller

releasing solenoid [1] from the support plate,

take note of the positions of the two fixing

screws [2] on the solenoid; or, mark the

position of the solenoid on the support plate

with a scriber.

If you are replacing the solenoid on its

own, be sure to secure it in its initial position.

Figure 8-346

CHAPTER 8 PAPER DECK

E. Electrical System

1. Removing the Side Deck Driver

1) Disconnect the deck from the copier, and

remove the six screws; then, detach the

2) Disconnect the nine connectors [1], and

remove the two screws; then, remove the

deck driver PCB [3].

Figure 8-347

2. Removing the Open Switch PCB

1) Disconnect the deck from the copier, and

push down the latch plate [2] of the

compartment [1] to open the compartment.

Figure 8-348

Chapters

Gp405 Gp405sm