Print secured print data using SECURED PRINT (See p. 6-66) in the UTILITY
•
menu or the Remote UI.
Secured print data is deleted by turning the printer OFF or performing a hard reset
•
or soft reset even if the time specified in this item has not elapsed yet.
Specify the file name, user name, and password in the printer driver.
•
This item is displayed only when an optional hard disk is installed, and HARD DISK
•
is set to ON. When HARD DISK is set to OFF, the setting for this item is ignored,
and the secured print jobs cannot be deleted.
SECURED TYPE
IMAGE*, PDL
Specifies the format to be used for when secured print data is saved in this printer.
If IMAGE is specified, the data sent from the computer is saved on the hard disk
with the image opened.
If PDL is specified, the data sent from the computer is saved on the hard disk as it
is.
NOTE
If IMAGE is specified, the process time after the password is entered for printing
•
becomes shorter than when PDL is specified. However, you cannot interrupt the
job that has already started to be printed or stop the operation.
Encrypted secured print data is saved in PDL regardless of the setting for this item.
•
This item is displayed only when an optional hard disk is installed, and HARD DISK
•
is set to ON.
RIP ONCE
ON*, OFF
Specifies whether to use the function of "RIP Once" when an optional hard disk is
installed. RIP Once is a function that saves the data of the first copy on the hard
disk and prints the second and subsequent copies at a high speed when you print
multiple copies.
This function is effective for printing a large amount of copies or multiple copies of
complicated data, such as the one that contains many diagrams or images.
IMPORTANT
After changing the settings for this item, cycle the power of the printer or perform a
hard reset to make the settings effective.
NOTE
This function may have little effect on printing relatively simple data such as the one
•
that contains only text or small amount of copies.
SETUP Menu Settings
6
6-21