■ Power Save Mode 2 (Printer Power Save Mode) ... Power-saving effect:
Large
The printer enters Power Save Mode 2 when it is in all the following conditions.
The printer has already entered Power Save Mode 1.
POWER SAVE MODE is set to ON.
The 15 minutes for which the printer remains in the printer status has passed since the
printer was turned ON or Power Save Mode 2 was released.
There is no job on the print queue.
3
A service call is not occurring.
A paper jam is not occurring.
No cover is open.
The toner cartridge is installed.
NOTE
When the printer enters Power Save Mode 2, only the
•
However, when the printer is offline, only the
Power Save Mode 2 can be released when the printer is in any of the following status:
•
- When any key on the control panel is pressed
- When an error occurs (However, Power Save Mode 2 may not be released depending
- When the printer is online and receives data from the computer (except for when the
- When WAKE UP TIMER (See p. 6-17) in TIMER SETTINGS is set to ON, and the time
- When the settings for [Utility Menu] are specified in the Remote UI
- When the settings for [Perform Calibration] are specified in the Remote UI
- When the settings for [Device Control] are specified in the Remote UI
- When the [User Maintenance Menu] page in the [Device Settings] menu in the Remote
3-4
Power Saving (Power Save Mode)
on the error type.)
printer is storing a job into a box)
specified in WAKE UP TIME (See p. 6-18) has elapsed
UI is displayed or specified its settings
Condition
(Ready) indicator comes on.
(Message) indicator comes on.