Canon imagePROGRAF GP-4000 Online Manual page 255
Hide thumbs
Also See for imagePROGRAF GP-4000:
- Quick manual (32 pages) ,
- Online manual (1013 pages) ,
- Setup manual (66 pages)
Table of Contents
Advertisement
Selecting Enable HTTPS redirection redirects the communication using CHMP to encrypted
communication.
Note
• To use CHMP for encrypted communication, you need to register the printer's root certificate to
your computer.
Registering Printer's Root Certificate to Local Computer for SSL Communication
• CHMP is a Canon proprietary protocol.
◦ Network interface settings
◦
To connect to a hub that supports STP, select Enable.
Selecting Enable perform the intermittent data reception when connecting to the network.
◦ DRX settings
◦
Selecting Enable perform the intermittent data reception when connecting to the network.
◦ IP filtering
◦
Allows or denies access for specific IP addresses.
Settings for both IPv4 and IPv6 addresses can be specified.
Important
• If the device address for the administrator has been set to rejection by mistake, initialize the
•
printer's network information, and then perform setup again.
LAN settings > Wi-Fi/Wireless Direct/Wired LAN > Settings > Advanced setup > Reset
LAN settings
◦ MAC address filtering settings
◦
Allows or denies access for specific MAC addresses.
Important
•
• If the device address for the administrator has been set to rejection by mistake, initialize the
printer's network information, and then perform setup again.
LAN settings > Wi-Fi/Wireless Direct/Wired LAN > Settings > Advanced setup > Reset
LAN settings
◦ Reset LAN settings
◦
Initializes the network settings on the printer.
After resetting, perform setup again as necessary.
255
Advertisement
Table of Contents
Troubleshooting
