Canon imagePROGRAF GP-4000 Online Manual page 854

Hide thumbs Also See for imagePROGRAF GP-4000:

Table of Contents

The roll paper loaded in the printer is narrower than the roll paper width in the print job.

Tap OK on the touch screen to go to the next screen.

Check the media type and size that appear and tap OK.

• Stopping printing

Tap Cancel or Stop on the touch screen.

• Replacing the roll paper

Follow the steps below to replace the paper with roll paper of the width specified in the print job paper

size settings.

1. Tap Replace the paper and print, then remove the roll paper.

Removing the Upper Roll from the Printer

Removing the Lower Roll from the Roll Unit (Option)

2. Replace the paper with paper of the width set in the printer driver.

Loading the Upper Roll on the Printer

Loading the Lower Roll on the Roll Unit (Option)

Printing begins.

• Printing without changes

Tap Print with the loaded paper..

However, note that this error may cause paper jams and affect the printing quality.

• To change print settings in Windows, select Fit Roll Paper Width in the printer driver and set the roll

paper width in the dialog box that appears.

• To change print settings in macOS, open the printer driver and select Fit Roll Paper Width, and then

set the roll paper width in that panel to the width of the paper loaded in the printer.

• To suppress this message, set Detect paper setting mismatch in the touch screen menu to Do not

detect. However, note that this error may affect the printing quality.

Menu Structure

Troubleshooting