Canon imagePROGRAF GP-4000 Online Manual page 604

Hide thumbs Also See for imagePROGRAF GP-4000:

Table of Contents

0.5 seconds / 1 second / 3 seconds / 5 seconds / 7 seconds / 9 seconds

After one scan has been printed, the next one will be printed after the set time has elapsed.

Increase the interval depending on the occurrence of bleeding and uneven coloring.

Roll Paper Safety Margin

Allows you to specify the length of the white margins on the edges of the paper in order to make even

significantly curled paper adsorb to the platen.

Printer Default

Applies the settings configured in operation panel of the printer.

Prints in standard-size.

Choose this setting if there are no particular problems when printing.

Choose this setting in case of chafing against the print head, for example when using significantly

curled paper.

Allows you to select the speed of automatic cutting. Use it to adjust the automatic cutting function when

clean cutting is not possible.

Printer Default

Applies the settings configured in operation panel of the printer.

Choose this if clean cut surfaces are not possible with the Standard setting.

Choose this if there are no particular problems with automatic cutting.

Choose it when using adhesive paper in order to prevent the glue from sticking to the cutter and to

avoid a drop in cutting performance.

Automatic Cutting

You can set whether to have the paper cut automatically or to have cut lines printed on the paper.

The following settings can be configured for automatic cutting.

Applies the settings configured in the operation panel of the printer unit.

After printing is over, the printer goes on to print the next set of data without cutting the paper into

individual pages.

Print Cut Guideline

After printing is over, the printer prints cutting lines on each page and goes on to print the next set

Unidirectional Printing

Suppresses uneven coloring and line shifts during printing.

To perform unidirectional printing, check this check box.

Troubleshooting