Canon imagePROGRAF GP-4000 Online Manual page 218

Hide thumbs Also See for imagePROGRAF GP-4000:

Table of Contents

Printer name

Bonjour service name

("XX" represents alphanumeric characters.)

To change the setting, tap Settings.

◦ Enable/disable Wi-Fi

Select Enable to wirelessly connect via wireless router.

◦ Wi-Fi setup

Select how to setup Wi-Fi.

▪ Easy wireless connect

Select if you specify the settings of the access point information to the printer directly from a

device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen

instructions of the connecting device for the setup procedure.

▪ Manual connect

Select when you perform settings for Wi-Fi manually using the operation panel of the printer.

▪ WPS (Push button method)

Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected

Setup (WPS) push button method. Follow the on-screen instructions during setup.

▪ Other connection types

▪ Manual connect (adv.)

Select when you perform settings for Wi-Fi manually. You can specify multiple WEP keys.

▪ WPS (PIN code method)

Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi

Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.

• By tapping Advanced, you can set LAN in detail.

For the items that can be set, see the following.

• Wireless Direct

The following setting information on the Wireless Direct connection is displayed. (Some items are not

displayed depending on printer settings.)

Network name (SSID)

XXXXXXXXXXXXXXX (up to 15 characters)

XXXXXXXXXXXXX

XXXXXXXXXXXXX (up to 52 characters)

Enable / Disable

DIRECT-XXXX-GP-NNNN*1

XXXXXXXXXX (10 characters)

Troubleshooting