Canon imagePROGRAF GP-4000 Online Manual page 174

Hide thumbs Also See for imagePROGRAF GP-4000:

Table of Contents

• If the roll holder lifts up, it may cause an error.

7. To stabilize operations when starting taking up, advance roll paper with operation panel and

wind roll paper approximately one revolution. (See

8. Push roll holder downward again, and check that roll holder is not lifting up.

The winding preparation is complete. When printing to the roll starts, the roll paper can be

automatically wound.

• If Ready to print appears on touch screen

1. Manually advance roll paper (See

for leading edge of roll paper to reach roll unit.

2. Hold center of leading edge of roll paper, align right edge of take-up spool paper core's right

edge and tape center to paper core while pulling on roll paper evenly.

◦ Outward Winding

◦ Inward Winding

• If winding with inward winding, you must pass the leading edge of the roll paper to the

back of the paper core and secure with tape. If this operation is difficult, you can also

remove the roll holder, push the roll paper into the back, reinstall the roll holder, and pass

the roll paper to the back of the paper core.

3. Align right edge of roll paper to right edge of paper core while pulling on roll paper evenly, and

secure with tape.

"Feeding Roll Paper

Manually.") or start printing, and wait

Troubleshooting