Canon imagePROGRAF GP-4000 Online Manual page 219
Hide thumbs
Also See for imagePROGRAF GP-4000:
- Quick manual (32 pages) ,
- Online manual (1013 pages) ,
- Setup manual (66 pages)
Table of Contents
Advertisement
Communication mode
Channel
Wi-Fi security
IPv4 address
IPv4 subnet mask
IPv4 default gateway
IPv4 DNS dynamic settings
IPv4 DNS host name
IPv4 DNS domain name
IPv6 link-local address
IPv6 link-local prefix length
MAC address
IPsec settings
Printer name
Bonjour service name
*1 means printer's model name
("XX" represents alphanumeric characters.)
To change the setting, tap Settings.
◦ Enable/disable Wireless Direct
◦
Select Yes to wirelessly connect without wireless router.
◦ Update SSID/password
◦
Updates the identifier (SSID) and password.
◦ Wireless Direct network (SSID)
◦
Changes the name (device name) of the printer displayed on Wi-Fi Direct compatible device.
◦ Connection request confirmation
◦
Changes the display / non-display of the confirmation screen when Wi-Fi Direct compatible devices
are connected to the printer.
Note
• By tapping Advanced, you can set LAN in detail.
•
For the items that can be set, see the following.
Wireless Direct
3
WPA2-PSK (AES)
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
Enable / Disable
XXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXX (up to 64 characters)
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
XXX (up to 3 digits)
XX:XX:XX:XX:XX:XX (12 characters)
Disable
XXXXXXXXXXXXXXX (up to 15 characters)
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
219
Advertisement
Table of Contents
Troubleshooting
