LEDs
LED
Status/bottom
LED
Line Card LEDs
The Beacon (BCN) and Status (STS) LEDs are located on the front, toward the left side of the module. The
Link LED for each port is located either between the two rows of ports, or if there is a single row of ports,
placed up/down between ports. Each of the Link LEDs is a triangle pointing to the port above or below the
LED. The following table describes the possible states for each of these LEDs.
LED
BCN
Color
Status
The fabric module is operational.
Green
Flashing green
First press of the ejector button has been registered
Flashing yellow
The removal of the module is in progress
Flashing red
The fabric module has a fault.
Flashing amber
The fabric module is booting up.
Off
No power is going to the fabric module.
Color
Status
Flashing blue
The operator has activated this LED to identify this module in the
chassis.
Off
This LED is not being used.
Cisco Nexus 9508 ACI-Mode Switch Hardware Installation Guide
Line Card LEDs
101