Table of Contents
Advertisement
About this task
Steps
1. Align the notch on the memory module with the tab on the memory module slot and slide the memory module firmly into the
slot at an angle.
2. Press the memory module down until the clips secure it.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Connect the
battery
cable.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Disconnect the
battery
after working inside your
before working inside your
cable.
computer.
computer.
Disassembly and reassembly
31
Advertisement
Table of Contents
