Table of Contents
Advertisement
Steps
1. Reconnect the touchpad FFC to the touchpad module.
2. Align and place the touchpad module onto the system.
NOTE:
When installing the touchpad bracket on the Vostro 3400, insert its top corners under the two tabs on the palm
rest.
3. Install the two (M2x2) screws to secure the touchpad module to the palmrest.
4. Install the touchpad bracket on the touchpad and secure it using the three (M2x2) screws.
5. Peel back the conductive tape over the touchpad module.
6. Reconnect the touchpad FFC to the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
after working inside your
computer.
Disassembly and reassembly
53
Advertisement
Table of Contents
