Table of Contents
Advertisement
Steps
1. Align and place the system board on the palmrest.
2. Replace the single (M2x4) screw that secures the system board to the palmrest.
3. Connect the following cables to the system board:
a. Speaker cable
b. Keyboard FFC
c. Keyboard backlight FFC
d. Touchpad FFC
e. Hard drive FFC
f. IO board FFC
g. Power adapter port cable
h. Fingerprint reader FFC
i.
Power button FFC from the system board
4. Fold back the right hinge and install the two (M2.5x5) screws to secure it to the palmrest.
Next steps
1. Install the
display
assembly.
2. Install the heatsink.
3. Install the
system
fan.
4. Install the
memory
5. Install the SSD.
6. Install the WLAN.
7. Install the battery.
8. Install the
base
cover.
9. Install the
SD
card.
10. Follow the procedure in
after working inside your
computer.
Disassembly and reassembly
73
Advertisement
Table of Contents
