Table of Contents
Advertisement
About this task
Steps
1. Align and place the fan on the palm rest.
2. Replace the two screws (M2.5x5) that secure the fan to the palmrest.
3. Route the display cable thought the routing points on the fan assembly, and connect the fan cable to the connector on the
system board .
Next steps
1. Reconnect the
battery
2. Replace the
base
cover.
3. Replace the
SD
card.
4. Follow the procedure in
Heat sink
Removing the Heatsink - UMA
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Disconnect the
battery
cable.
after working inside your
before working inside your
cable.
computer.
computer.
Disassembly and reassembly
43
Advertisement
Table of Contents
