Table of Contents
Advertisement
COPIER (Service mode for printer) > TEST (Print test mode) > NETWORK
IPV6-ADR
1
Detail
Adj/Set/Operate Method
Caution
Related Service Mode
PING-IP6
1
Detail
Adj/Set/Operate Method
Related Service Mode
■ NET-CAP
COPIER (Service mode for printer) > TEST (Print test mode) > NET-CAP
CAPOFFON
2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
STT-STP
2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
CAPSTATE
2
Detail
Adj/Set/Operate Method
Related Service Mode
Additional Functions
Mode
Setting of PING send address (IPv6)
To set the IPv6 address to send PING.
When PING is sent to this address by COPIER> TEST> NETWORK> PING-IP6, the network
connection condition in the IPv6 environment can be checked.
Enter the setting value, and then press OK key.
- Enter a consistent character string as an address of IPv6.
- Enter an address within 39 characters including hexadecimal numbers (0-9, a-f) and a separator
(:).
COPIER> TEST> NETWORK> PING-IP6
PING transmission to IPv6 address
To send PING to the address specified by IPV6-ADR.
The network connection condition in the IPv6 environment can be checked.
Select the item, and then press OK key.
COPIER> TEST> NETWORK> IPV6-ADR
ON/OFF of NetCap function
To set ON/OFF of network packet capture function.
Enter the setting value, and then press OK key.
0 to 1
0: OFF, 1: ON
0
COPIER> TEST> NET-CAP
Store Network Packet Log
Start and stop of network packet capture
To start and stop network packet capture.
Enter the setting value, and then press OK key.
0 to 1
0: Stop, 1: Start
0
COPIER> TEST> NET-CAP
Store Network Packet Log
State display of network packet capture
To display the state of network packet capture.
N/A (Display only)
COPIER> TEST> NET-CAP
Store Network Packet Log
688
9. Service Mode
Advertisement
Table of Contents
Troubleshooting
