Table of Contents
Advertisement
■ PART-CHK
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > PART-CHK
MTR
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
MTR-ON
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
SL
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
SL-ON
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
Specification of operation motor
To specify the motor to operate.
When replacing the motor/checking the operation
Enter the setting value, and then press OK key.
0 to 14
0: Scanner Motor (M7)
1: Yellow drum,yellow developer and magenta developer Motor (M2)
2: Magenta drum,cyan drum and cyan developer Motor (M3)
3: Black drum, black developer and ITB Motor (M3)
4: Developer alienation motor (Engagement [4C]) (M6)
5: Developer alienation motor (Engagement [Bk]) (M6)
6: Primary Transfer Roller Engagement[4C](SL1+M4)
7: Primary Transfer Roller Engagement[Bk](SL1+M4)
8: Pickup_Registration Motor(M5)
9: CST2 Pickup Motor(M602/M6/M6)
10: CST3 Pickup Motor(M602/M5)
11: CST4 Pickup Motor(M7)
12: Reverse Motor(M8)
13: Fixing Motor(M4)
14: Fixing Motor (Disengage Motion) (M4)
0
COPIER> FUNCTION> PART-CHK> MTR-ON
Operation check of Motor
To start operation check of the Motor specified by MTR.
The operation automatically stops after operation of 10 seconds.
When replacing the Motor/checking the operation
Select the item, and then press OK key.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> PART-CHK> MTR
Specification of operation solenoid
To specify the solenoid to operate.
When replacing the solenoid/checking the operation
Enter the value, and then press OK key.
0 to 6
0: Multi-purpose Tray Pickup Solenoid (SL2)
1: Cassette1 Pickup_Feed Clutch (CL1)
2: Option Cassette 2 Pickup Clutch (CL601/CL1/CL1)
3: Option Cassette 3 Pickup Clutch (CL603/CL1)
4: Option Cassette 4 Pickup Clutch (CL1)
5: Reverse Solenoid (SL3)
6: Duplex re-pickup clutch (CL2)
0
COPIER> FUNCTION> PART-CHK> SL-ON
Operation check of Solenoid
To start operation check for the Solenoid specified by SL.
The operation automatically stops after operation of 10 seconds.
When replacing the Solenoid/checking the operation
Select the item, and then press OK key.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> PART-CHK> SL
576
9. Service Mode
Advertisement
Table of Contents
Troubleshooting
