Table of Contents
Advertisement
5. Connect your computer and all attached devices to electrical outlets, and turn them on.
Removing the Hard-Drive Fan Assembly
1. Follow the instructions in
Before You
2. Remove the left side-panel (see
3. Open the PCI shroud (see
Opening the PCI
4. Remove the drive-bay shroud (see
5. Make note of the hard-drive fan cable routing and then disconnect the hard-drive fan assembly cable from the connector on the master I/O board.
6. Lift the hard-drive fan assembly out of the chassis.
1 hard-drive fan assembly cable 2 hard-drive fan assembly
Replacing the Hard-Drive Fan Assembly
1. Follow the instructions in
Before You
2. Push the hard-drive fan assembly into the hard-drive fan assembly bay.
3. Route the cable through the slot in the hard-drive bay and then connect the hard-drive fan assembly cable to the connector on the master I/O board.
4. Replace the drive-bay shroud (see
5. Close the PCI shroud (see
Closing the PCI
6. Replace the left side-panel (see
7. Connect your computer and all attached devices to electrical outlets, and turn them on.
Removing the PCI-Fan Assembly
1. Follow the instructions in
Before You
2. Remove the left side-panel (see
3. Open the PCI shroud (see
Opening the PCI
Begin.
Removing the Left
Side-Panel).
Shroud).
Removing the Drive-Bay
Shroud).
Begin.
Replacing the Drive-Bay
Shroud).
Shroud).
Replacing the Left
Side-Panel).
Begin.
Removing the Left
Side-Panel).
Shroud).
Hide quick links:
Advertisement
Table of Contents
