Back to Contents Page
Right Side-Panel(s)
Alienware Aurora Service Manual
Removing the Right-Side Top Panel
Replacing the Right-Side Top Panel
Removing the Lighting Board
Replacing the Lighting Board
Removing the Right-Side Middle Panel
Replacing the Right-Side Middle Panel
Removing the Right-Side Bottom Panel
Replacing the Right-Side Bottom Panel
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
Do not operate your computer with any cover(s) (including computer panels, bezels, filler brackets, etc.) removed.
WARNING:
To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the side panel(s).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
Removing the Right-Side Top Panel
1. Follow the instructions in
Before You
2. Remove the left side-panel (see
3. Open the PCI shroud (see
Opening the PCI
4. Remove the drive-bay shroud (see
5. Remove the screw that secures the right-side top panel.
1
screw
6. Place the chassis in an upright position.
7. Slide and pull the right-side top panel away from the chassis.
Begin.
Removing the Left
Side-Panel).
Shroud).
Removing the Drive-Bay
Shroud).