Table of Contents
Advertisement
4. Remove the drive-bay shroud (see
5. Remove full-length PCI-Express card(s), if any (see
6. Disconnect the PCI-fan assembly cable from the connector on the master I/O board.
7. Press the tabs and lift the PCI-fan assembly out of the metal brackets on the chassis.
1
tabs (2)
2
PCI-fan assembly
3
PCI-fan assembly cable
Replacing the PCI-Fan Assembly
1. Follow the instructions in
Before You
2. Align the PCI-fan assembly with the metal brackets on the chassis.
3. Slide the PCI-fan assembly into the chassis.
4. Connect the PCI-fan assembly cable to the connector on the master I/O board.
5. Replace full-length PCI-Express card(s), if any (see
6. Replace the drive-bay shroud (see
7. Close the PCI shroud (see
Closing the PCI
8. Replace the left side-panel (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
9. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
Removing the Drive-Bay
Shroud).
Removing the PCI-Express
Begin.
Replacing the PCI-Express
Replacing the Drive-Bay
Shroud).
Shroud).
Replacing the Left
Side-Panel).
Card(s)).
Card(s)).
Hide quick links:
Advertisement
Table of Contents
