Table of Contents
Advertisement
Back to Contents Page
Theater-Lighting Batteries (Alienware Aurora ALX Only)
Alienware Aurora Service Manual
Removing the Theater-Lighting Batteries
Replacing the Theater-Lighting Batteries
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
Do not operate your computer with any cover(s) (including computer panels, bezels, filler brackets, etc.) removed.
WARNING:
To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the side panel(s).
WARNING:
A new battery can explode if it is incorrectly installed. Replace the battery only with the same or equivalent type recommended by the
manufacturer. Discard used batteries according to the manufacturer's instructions.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
Removing the Theater-Lighting Batteries
1. Follow the instructions in
Before You
2. Remove the left side-panel (see
3. Open the PCI shroud (see
Opening the PCI
4. Remove the drive-bay shroud (see
5. Turn the drive-bay shroud over.
6. Open the theater-lighting battery compartment door.
7. Remove the two batteries (AA rechargeable) from the theater-lighting battery compartment.
1 drive-bay shroud
2 theater-lighting battery-compartment door
Replacing the Theater-Lighting Batteries
1. Follow the instructions in
Before You
2. Insert the two new batteries (AA rechargeable) in the theater-lighting battery compartment.
3. Close the theater-lighting battery-compartment door.
4. Replace the drive-bay shroud (see
5. Close the PCI shroud (see
Closing the PCI
6. Replace the left side-panel (see
Begin.
Removing the Left
Side-Panel).
Shroud).
Removing the Drive-Bay
Shroud).
Begin.
Replacing the Drive-Bay
Shroud).
Shroud).
Replacing the Left
Side-Panel).
Hide quick links:
Advertisement
Table of Contents
