Table of Contents
Advertisement
Back to Contents Page
Shrouds
Alienware Aurora Service Manual
Opening the PCI Shroud
Closing the PCI Shroud
Removing the Drive-Bay Shroud
Replacing the Drive-Bay Shroud
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
Do not operate your computer with any cover(s) (including computer panels, bezels, filler brackets, etc.) removed.
WARNING:
To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the side panel(s).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
Opening the PCI Shroud
1. Follow the instructions in
Before You
2. Remove the left side-panel (see
3. Press the shroud button and rotate the PCI shroud away from the chassis.
1
PCI shroud
2
shroud button
Closing the PCI Shroud
1. Follow the instructions in
Before You
2. Lower the PCI shroud into the chassis until it clicks into place.
3. Replace the left side-panel (see
4. Connect your computer and all attached devices to electrical outlets, and turn them on.
Removing the Drive-Bay Shroud
1. Follow the instructions in
Before You
Begin.
Removing the Left
Side-Panel).
Begin.
Replacing the Left
Side-Panel).
Begin.
Hide quick links:
Advertisement
Table of Contents
