Table of Contents
Advertisement
■ CLEANING
COPIER > OPTION > CLEANING
W-CLN-P
Set last rotn Prmry Charge Wir cln intvl
Lv.2 Details
To set the offset value of the paper interval for automatic cleaning of
the Primary Charging Wire.
Default is 2000 sheets, and the paper interval can be changed within
the range between 1000 and 5000 sheets.
Use case
Upon user's request
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
-1000 to 3000
Unit
1 sheet
Default value
0 (2000 sheets)
CLN-SW
ON/OFF of cleaning black band sequence
Lv.1 Details
To set ON/OFF of black band sequence for cleaning.
When printing a low duty image while toner ejection operation at low
duty image is set to OFF, amount of toner supply to the Cleaning
Blade is decreased extremely. Toner is supplied to the edge of
Cleaning Blade if the sequence is executed.
The execution of sequence is synchronized with the Primary
Charging Wire cleaning timing.
When setting CLN-SW to 2 and setting CLN-ADJ to 0, the setting
value "7" of environment control for each process speed is executed.
When setting CLN-SW to 2 and setting CLN-ADJ to other than 0,
operation is accorded with the setting value of CLN-ADJ.
When setting CLN-SW to 0, operation is not executed regardless of
the CLN-ADJ setting.
Use case
When amount of toner supply to the Cleaning Blade is decreased
extremely
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 2
0: OFF, 1: Based on environment control, 2: ON
Default value
1
Related service mode
COPIER> OPTION> CLEANING> CLN-ADJ
8
Service Mode > COPIER > OPTION > CLEANING
8
Service Mode > COPIER > OPTION > CLEANING
COPIER > OPTION > CLEANING
CLN-ADJ
Set black band length for cleaning
Lv.1 Details
To set black band length for cleaning.
When setting CLN-SW to 2 and setting CLN-ADJ to 0, the setting
value "7" of environment control for each process speed is executed.
When setting CLN-SW to 2 and setting CLN-ADJ to other than 0,
operation is accorded with the setting value of CLN-ADJ.
When setting CLN-SW to 0, operation is not executed regardless of
the CLN-ADJ setting.
However, with imageRUNNER ADVANCE 8105/8095/8085 (Pro),
black band sequence is not executed although the setting value of
environment control is "7". Set CLN-ADJ to other than 0 to execute
the operation.
Use case
When amount of toner supply to the Cleaning Blade is decreased
extremely
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 4
0: Based on environment control, 1: 1000 mm, 2: 2098 mm, 3: 3548
mm, 4: 5000 mm
Default value
0
Related service mode
COPIER> OPTION> CLEANING> CLN-SW
8-139
T-8-61
8-139
Advertisement
Table of Contents
Troubleshooting
