hit counter script

Transceivers, Connectors, And Cables; Transceiver And Cable Specifications; Rj-45 Connectors - Cisco Nexus 9508 Hardware Installation Manual

Nx-os mode switch
Hide thumbs Also See for Nexus 9508:
Table of Contents

Advertisement

System Specifications

Transceivers, Connectors, and Cables

Transceiver and Cable Specifications

To determine which transceivers, adapters, and cables are supported by this switch, see
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
To see the transceiver specifications and installation information, see
https://www.cisco.com/c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.

RJ-45 Connectors

The RJ-45 connector connects Category 3, Category 5, Category 5e, Category 6, or Category 6A foil twisted-pair
or unshielded twisted-pair cable from the external network to the following module interface connectors:
• Switch chassis
Caution
To comply with GR-1089 intrabuilding, lightning immunity requirements, you must use a foil twisted-pair
(FTP) cable that is properly grounded at both ends.
The following figure shows the RJ-45 connector.
Figure 1: RJ-45 Connector
1
◦ CONSOLE port
◦ MGMT ETH port
Pin 1
2
Pin 2
Cisco Nexus 9508 NX-OS Mode Switch Hardware Installation Guide
Transceivers, Connectors, and Cables
https://www.cisco.com/
125

Advertisement

Table of Contents
loading

Table of Contents