Installing A Fabric Module - Cisco Nexus 9508 Hardware Installation Manual
Nx-os mode switch
Hide thumbs
Also See for Nexus 9508:
- Hardware installation manual (118 pages) ,
- Hardware installation manual (116 pages)
Table of Contents
Advertisement
Replacing or Installing Modules, Fan Trays, and Power Supplies
Installing a Fabric Module
Before You Begin
• You must wear an electrostatic discharge (ESD) wrist strap or other ESD protective device while handling
• Prepare an antistatic surface or packing materials for each module that you remove from the chassis.
• Be sure that you are replacing a fabric module with the same type of fabric module (all of the fabric
Step 1
Place one hand on the front of the module and turn the module 90 degrees so that the electrical connectors are on the
bottom.
Step 2
Unscrew the two captive screws (one on each ejector handle) and rotate the ejector handles away from the chassis (see
Callouts 1 and 2 in the following figure). Be sure that the locking posts on the top and bottom of the chassis (see Callout
3) rotate into the module so that the module can slide fully into the slot.
modules.
modules installed in the switch must be the same type).
Cisco Nexus 9508 NX-OS Mode Switch Hardware Installation Guide
Installing a Fabric Module
97
Hide quick links:
Advertisement
Table of Contents
