Saving The Module Configuration; Shutting Down Or Starting Up A Module - Cisco Nexus 9508 Hardware Installation Manual
Nx-os mode switch
Hide thumbs
Also See for Nexus 9508:
- Hardware installation manual (118 pages) ,
- Hardware installation manual (116 pages)
Table of Contents
Advertisement
Managing the Switch
Saving the Module Configuration
To save the new configuration to nonvolatile storage, use the copy running-config startup-config command
from EXEC mode. Once you enter this command, the running and the startup copies of the configuration are
identical.
The following table lists various scenarios when module configurations are preserved or lost.
Scenario
A particular switching module is removed and you
used the copy running-config startup-config
command again.
A particular switching module is removed and the
same switching module is replaced before you enter
the copy running-config startup-config command
again.
A particular switching module is removed and
replaced with the same type switching module, and
you entered the reload module slot_number
command.
A particular switching module is reloaded when you
enter the reload module slot_number command.
Shutting Down or Starting Up a Module
You can shut down or power up a module by using the poweroff module or no poweroff module command
to specify the module by its slot number in the chassis.
Note
To determine the slot number for a module, use the show inventory command.
You can use this command with software-controlled modules, such as supervisors, system controllers,
Note
line cards, fabric modules, fan trays, and power supplies. It does not work with modules that are not
controlled by software, such as blank modules installed in empty slots to control airflow.
Step 1
Use the configure terminal to enter the global configuration mode.
Result
The configured module information is lost.
The configured module information is preserved.
The configured module information is preserved.
The configured module information is preserved.
Cisco Nexus 9508 NX-OS Mode Switch Hardware Installation Guide
Saving the Module Configuration
59
Hide quick links:
Advertisement
Table of Contents
