Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita HR006GD203
Summary of Contents for Makita HR006GD203
- Page 1 INSTRUCTION MANUAL Cordless Rotary Hammer HR006G Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: HR006G Capacities Carbide-tipped bit 52 mm Core bit 160 mm No load speed (RPM) 150 - 310 min Blows per minute 1,100 - 2,250 min Rated voltage D.C. 72 V - 80 V max Overall length 610 mm Net weight 12.9 - 14.3 kg •... -
Page 3: Ec Declaration Of Conformity
Do not expose power tools to rain or wet con- NOTE: The declared vibration total value(s) has been ditions. Water entering a power tool will increase measured in accordance with a standard test method the risk of electric shock. and may be used for comparing one tool with another. Do not abuse the cord. - Page 4 Battery tool use and care Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically desig- nated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one...
- Page 5 12. Use the batteries only with the products WARNING: DO NOT let comfort or familiarity specified by Makita. Installing the batteries to with product (gained from repeated use) replace non-compliant products may result in a fire, exces- strict adherence to safety rules for the subject sive heat, explosion, or leak of electrolyte.
- Page 6 If accidentally swallowed, seek medical supplied case or a static-free container. attention immediately. 26. Do not insert any devices other than Makita Use the wireless unit only with Makita tools. wireless unit into the slot on the tool. Do not expose the wireless unit to rain or wet 27.
-
Page 7: Functional Description
Indicating the remaining battery capacity FUNCTIONAL DESCRIPTION Press the check button on the battery cartridge to indi- cate the remaining battery capacity. The indicator lamps light up for a few seconds. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge CAUTION: Always switch off the tool before... -
Page 8: Overheat Protection
The lamp goes out approximately 10 seconds after releasing the switch trigger. NOTICE: If the lamp goes off after blinking for a few seconds, the active feedback sensing tech- nology is not working properly. Ask your local Makita Service Center for repair. ► 1 . Adjusting dial 8 ENGLISH... -
Page 9: Electronic Function
This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after the switch trigger is released, have the tool serviced at a Makita service center. ► 1 . Pointer 2. Action mode changing knob 9 ENGLISH... -
Page 10: Side Handle
The side grip can be swung, allowing easy handling of ASSEMBLY the tool in any position. Loosen the side grip by turning it counterclockwise, swing it to the desired position and then tighten it by turning clockwise. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Side handle ► 1 . Side grip Installing or removing drill bit Grease CAUTION:... -
Page 11: Depth Gauge
To remove the drill bit, pull the release cover down all Depth gauge the way and pull the drill bit out. The depth gauge is convenient for drilling holes of uniform depth. Press and hold the lock button, and then insert the depth gauge into the hex hole. ► 1 . - Page 12 Connecting the tool to the vacuum Dust extractor attachment cleaner Optional accessory Attach the holder joint to the tool, and then attach Installing the dust extractor the hose holder to the holder joint. attachment Loosen the side grip on the tool. Install the dust cover so that the claws of the dust cover fit in the grooves between the tool and the side grip. ► 1 . Dust cover 2. Claw 3. Groove Tighten the side grip securely.
- Page 13 Using depth gauge for drilling When the side grip is installed to the tool, loosen the side grip, mount the hose holder (B) to the shaft, and operation then tighten the side grip firmly. When you stack two bellows, attach the depth gauge extension to the depth gauge. ► 1 . Depth gauge extension ► 1 .
-
Page 14: Operation
NOTE: If the hose is not included, attach the dust cover to the cleaner's hose or attach it to Makita's hose ø28. Adjust the distance between the dust cover and the tip of the chisel or bull point. The recommended distance is 30 mm to 100 mm. - Page 15 Chipping/Scaling/Demolition WIRELESS ACTIVATION FUNCTION Set the action mode changing knob to the symbol. Hold the tool firmly with both hands. Turn the tool on and apply slight pressure on the tool so that the tool will Optional accessory not bounce around, uncontrolled. What you can do with the wireless Pressing very hard on the tool will not increase the efficiency. activation function The wireless activation function enables clean and com- fortable operation. By connecting a supported vacuum cleaner to the tool, you can run the vacuum cleaner automatically along with the switch operation of the tool.
- Page 16 Tool registration for the vacuum cleaner NOTE: A Makita vacuum cleaner supporting the wireless activation function is required for the tool registration. NOTE: Finish installing the wireless unit to the tool before starting the tool registration.
- Page 17 Set the stand-by switch on the vacuum cleaner to NOTE: The wireless activation lamps finish blinking "AUTO". in green after 20 seconds elapsed. Press the wireless activation button on the tool while the wireless acti- vation lamp on the cleaner is blinking. If the wireless activation lamp does not blink in green, push the wire- less activation button briefly and hold it down again.
- Page 18 Push the wireless activation button on the tool Pull the switch trigger of the tool. Check if the vac- briefly. The wireless activation lamp will blink in blue. uum cleaner runs while the switch trigger is being pulled. To stop the wireless activation of the vacuum cleaner, push the wireless activation button on the tool. NOTE: The wireless activation lamp on the tool will stop blinking in blue when there is no operation for 2 hours. In this case, set the stand-by switch on the...
- Page 19 If the cancellation is performed successfully, the wire- Cancelling tool registration for the less activation lamps will light up in red for 2 seconds vacuum cleaner and start blinking in blue. NOTE: The wireless activation lamps finish blinking in Perform the following procedure when cancelling the red after 20 seconds elapsed. Press the wireless acti- tool registration for the vacuum cleaner.
- Page 20 Troubleshooting for wireless activation function Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace- ment parts for repairs. State of abnormality Probable cause (malfunction) Remedy The wireless activation lamp does The wireless unit is not installed into the tool. Install the wireless unit correctly. not light/blink. The wireless unit is improperly installed into the tool. The terminal of the wireless unit and/or Gently wipe off dust and dirt on the terminal of the the slot is dirty.
-
Page 21: Maintenance
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. - Page 24 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885855-228 www.makita.com 20201202...