Table of Contents
Advertisement
2
Technology > Pickup / Feed System > Registration Unit > Registration Deceleration Control
■ Registration Control
The Registration Motor (M34) is rotated to make the image on the drum and the paper to be
aligned at the specified position and feeds the paper to the Transfer Assembly. The rotating
speed of the Registration Motor (M34) is increased to be higher than the process speed and
then reduced to meet the process speed.
Transfer Roller
Registration Roller
2
Technology > Pickup / Feed System > Registration Unit > Registration Deceleration Control
M33
Registration Front Roller
M34
F-2-176
■ Registration Deceleration Control
This control reduces speed of Multi-purpose Tray Registration Front Motor (M33) (Registration
feed speed) by using Registration Sensor (PS29) as a reference and pushes the paper
against the Registration Roller to reduce hitting noise.
Registration Roller
Vertical path speed
start point of deceleration
Registration Sensor
Model
ImageRUNNER ADVANCE 6075/6065/6055
PPM
75
Vertical path speed
Registration feed speed
350[mm/s]
start point of deceleration
7.6[mm]
stop point
23[mm] (20mm (distance between the Registration Sensor and the
Registration Roller) +3mm (registration arch volume
Registration Sensor
M33
Registration Front Roller
F-2-177
Pre-registration speed
Registration arch volume
5mm
3mm
Stop point
Registration Roller
F-2-178
65
55
500[mm/s]
290[mm/s]
5.3[mm]
2-137
T-2-78
2-137
Advertisement
Table of Contents
Troubleshooting
