Table of Contents
Advertisement
2. Hold the front and rear of the Process Unit [1] and remove it horizontally.
3. Slide the 2 rails [1] of the Process Unit back into the host machine.
NOTE:
When installing the Process Unit, if the Laser Dustproof Shutter is opened and blocks to install the unit, turn ON and then OFF the
power. Be sure to check that the Dustproof Shutter is closed before installation.
Installing the Process Unit
■ Preparation
1. Pulling out the Process
2. Removing the Process
[1]
[1]
Unit"Pulling out the Process Unit" on page 317
Unit"Removing the Process Unit" on page 320
321
4. Disassembly/Assembly
Advertisement
Table of Contents
Troubleshooting
