Table of Contents
Advertisement
ping -s <IP address> 479
Set the same address entered at Step 2.
Windows Sample:
ping 172.20.88.196 -l 479
Note
The -l entry is the alphabetic lower case "L" (not the number "1").
The subnet mask and gateway addresses are set to 0.0.0.0.
This completes preparation for the protocol setting.
Setting the IP Address with the Printer Operation Panel
1
On the printer operation panel, press the Online button. The Online
lamp goes off.
2
Press the Setup button.
3
Press
Set Interface
4
Press
5
Press
6
Select the method for setting the printer IP address. Press
select either setting below then press
Automatic:
Select when the IP address is to be set with DHCP, BOOTP, or RARP.
Manual:
Select when the IP address is to be assigned directly for the printer.
or
to select the following items then press
Ext. Network
Set TCP/IP
or
to select "Ethernet II" then press
or
to select "IP Mode" then press
.
Frame Type
.
.
or
.
Setting the Printer IP Address
to
2-7
Advertisement
Table of Contents
