Table of Contents
Advertisement
When You Cannot Print
This section describes how to solve printing problems.
Cannot print from a NetWare
Problem 1: The network interface board and network cable are not connected
correctly.
Solution:
Check the following points then cycle the printer off and on.
• Make sure that the network interface board is installed correctly. (
• Make sure that the correct type of cable is used to connect the printer to
Problem 2: The NetWare
Solution:
Check the following points:
• Make sure that the NetWare
• Make sure that sufficient disk space is available on the NetWare
• Start NetSpot, NWADMIN, or PCONSOLE and confirm (1) that the
• Make sure that the network settings for the printer are correct. (
Problem 3: Make sure that the computer settings are correct on the computer used for
printing.
Solution:
Check the following points:
• Make sure that the correct printer driver has been installed. In order to
• Make sure that correct printer port has been selected for the printer to be
®
network.
Setup Guide) The standard network printer does not require the
installation of the network interface board.
the network. (
Setup Guide)
®
network is not set correctly.
server. If sufficient space is not available, then large print jobs cannot
execute.
print queue is set correctly, and (2) that the print queue has been enabled
for use.
®
"Setting NetWare
Printer Protocol", P.3-17)
Check the following important points:
• Confirm that the Frame Type selection specifies an enabled frame type.
• Confirm that Print Server Name and Printer Number entries are
correct.
perform print jobs with Windows Me, Windows 98, or Windows 95, the
correct printer driver must be installed for each operating system. (
Setup Guide)
used for printing. In the Control Panel open the Printer folder and then
check the connection with the Properties command in the File menu.
®
file server is running.
®
file
5-3
When You Cannot Print
Advertisement
Table of Contents
