Network Setting (Macintosh)
Conguring the Destination for AppleTalk Network
(Macintosh)
To print over an AppleTalk network, activate the AppleTalk protocol and congure the destination as follows.
Activating AppleTalk on the printer
Important
•
By factory default, the AppleTalk protocol is disabled on the printer.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Interface Setup, and then press the ► button.
3.
Press ▲ or ▼ to select AppleTalk, and then press the ► button.
4.
Press ▲ or ▼ to select On, and then press the OK button.
5.
Press the Online button to bring the printer online.
If any of the settings is changed, a message for conrmation is displayed. In this case, press
the OK button.
Important
•
Be sure to complete step 5. This will activate the values you have entered.
Note
•
By using RemoteUI, you can also specify the object name used by AppleTalk, as well as the printer
zone name.
For details on RemoteUI, see "Using RemoteUI". (→P.584)
610 Network Setting