Adjusting The Feed Amount; Adjusting The Feed Amount Automatically - Canon imagePROGRAF iPF9000S User Manual
Hide thumbs
Also See for imagePROGRAF iPF9000S:
- Troubleshooting manual (191 pages) ,
- Brochure (8 pages) ,
- User manual (807 pages)
Table of Contents
Advertisement
Adjusting the feed amount
Adjusting the feed amount
Adjusting the Feed Amount Automatically
If printed images are affected by banding in different colors, adjust the amount that paper is fed. There are
two modes for adjusting the amount paper is fed, Standard Adj. and Advanced Adj.. Use Advanced
Adj. if Standard Adj. does not eliminate streaks, or when using paper other than genuine Canon paper or
paper for purposes other than checking output. When using highly transparent media not compatible with
automatic adjustment, you must adjust the feed amount manually. For instructions on manual adjustment, see
"Adjusting the Feed Amount Manually". (→P.685)
Note
•
To adjust the measurement scale and ensure accuracy (so that lines in CAD drawings are printed
at exactly the right length, for example), specify the amount of paper stretching or shrinkage when
adjusting the feed amount. (→P.688)
•
This may take some time, depending on the type of paper.
Important
•
Use paper of the same type and size for adjustment as you will use for printing.
•
To apply the results of adjusting the feed amount in printing, you must rst set Feed Priority to Band
Joint. Note that if you select Automatic, the results of adjustment will only be applied in printing if you
set Print Priority in the printer driver to Image or Ofce Document. (→P.248)
Follow these steps to change the Feed Priority setting.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Paper Details, and then press the ► button.
3.
Press ▲ or ▼ to select the type of paper, and then press the ► button.
4.
Press ▲ or ▼ to select Feed Priority, and then press the ► button.
5.
Press ▲ or ▼ to select Band Joint, and then press the OK button.
Follow the steps below to adjust the feed amount automatically.
1.
Prepare one unused sheet A4/Letter-sized or larger when Standard Adj. is selected or two
when Advanced Adj. is selected.
When using a roll, load a roll 10 inches (254 mm) or wider.
•
Loading Rolls on the Roll Holder (→P.116)
•
Loading Rolls in the Roll Holder Slot (→P.119)
•
Loading the Roll in the Printer (→P.120)
•
Loading the Sheet in the Printer (→P.147)
Note
•
Always make sure the loaded paper matches the media type setting. Adjustment cannot be
completed correctly unless the setting value matches the loaded paper.
682 Adjustments for Better Print Quality
Advertisement
Table of Contents
