Execute Printhead Cleaning - Canon imagePROGRAF iPF9000S User Manual
Hide thumbs
Also See for imagePROGRAF iPF9000S:
- Troubleshooting manual (191 pages) ,
- Brochure (8 pages) ,
- User manual (807 pages)
Table of Contents
Advertisement
Messages regarding printheads
Problem with Printhead x (x is L, R, or LR)
The Printhead nozzles are becoming clogged.
x printhead error (x is Left or Right)
An incompatible Printhead has been installed.
There is a problem with the Printhead.
Execute printhead cleaning.
The Printhead nozzles are clogged.
798 Error Message
Cause
Cause
Cause
Corrective Action
If printing is faint, clean the Printhead.
(→P.718)
Corrective Action
Install a Printhead specied for use with the printer. If
"Printhead L" is displayed, install the Printhead L ; if
"Printhead R" is displayed, install the Printhead R.
(→P.719)
Open the Top Cover. If the Carriage is over the
Platen, replace the Printhead with a new one. If
"Printhead L" is displayed, replace the Printhead L ; if
"Printhead R" is displayed, replace the Printhead R.
(→P.719)
If, after opening the Top Cover, you see that the
Carriage is not over the Platen, follow the steps
below.
1.
Turn off the printer and wait at least three seconds
before restoring the power.
2.
Lift the Top Cover and make sure the Carriage
is over the Platen. If "Printhead L" is displayed,
install the Printhead L, and if "Printhead R" is
displayed, install the Printhead R.
(→P.719)
Corrective Action
Follow these steps to clean the Printhead.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Printhead cleaning options.
(→P.718)
If this message is still displayed, replace either the
left, right, or both printheads as needed.
(→P.719)
Advertisement
Table of Contents
