Makita HR005GZ01 Instruction Manual page 12

Hide thumbs Also See for HR005GZ01:

Table of Contents

Make sure that the toothed side of the depth gauge

faces the marking.

► 1 . Marking 2. Toothed side

Adjust the depth gauge by moving it back and forth

while pressing the lock button. After the adjustment,

release the lock button to lock the depth gauge.

NOTE: Make sure that the depth gauge does not

touch the main body of the tool when attaching it.

Dust extractor attachment

Optional accessory

Installing the dust extractor

attachment

Loosen the side grip on the tool.

Install the dust cover so that the claws of the dust

cover fit in the grooves between the tool and the side

grip.

► 1 . Dust cover 2. Claw 3. Groove

Tighten the side grip securely.

Set the suitable bellows or dust cover extension

for your work. When you use bellows, attach the joint to

its top. When you stack two bellows, connect them with

the joint.

► 1 . Dust cover extension 2. Dust cover 3. Joint

4. Bellows

Connecting the tool to the vacuum

cleaner

Attach the holder joint to the tool, and then attach

the hose holder to the holder joint.

► 1 . Holder joint 2. Hose holder

NOTE: The hose joint can be attached to either side

of the tool.

12 ENGLISH

Table of Contents

Hr005g