Makita HR005GZ01 Instruction Manual page 13

Hide thumbs Also See for HR005GZ01:

Table of Contents

WARNING:

Use the mounting part of the tool

only for attaching the holder joint.

Using the mounting part for any other purpose may

cause an unexpected accident.

Fix the hose to the hose holder.

► 1 . Hose holder

NOTE: Use joint 25 to connect the hose and the dust

cover if necessary.

Using depth gauge for drilling

operation

When you stack two bellows, attach the depth gauge

extension to the depth gauge.

► 1 . Depth gauge extension

Dust extractor attachment (for

hammering only)

Optional accessory

Install the hose holder (A/B).

When the side handle is installed to tool, loosen the

clamp nut, and then remove the hex bolt. Install the

hose holder (A) between the hex bolt and the clamp nut

by tightening the clamp nut firmly.

► 1 . Hex bolt 2. Hose holder (A) 3. Clamp nut

When the side grip is installed to the tool, loosen the

side grip, mount the hose holder (B) to the shaft, and

then tighten the side grip firmly.

► 1 . Hose holder (B) 2. Shaft 3. Side grip

13 ENGLISH

Table of Contents

Hr005g