Table 16. Removal steps of BDC-2
Step
Screw (quantity)
1
M2 × 3 mm, small-head, nylon-coated (1)
When installing:
Make sure that the connector is attached firmly.
1100 I/O board
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 54
•
"1020 Bottom door" on page 56
•
"1030 Hard disk drive or solid state drive" on page 58
•
"1070 Keyboard" on page 61
• "1080 Palm rest assembly, power-on board assembly (with cable), and microphone" on page 64
68
Hardware Maintenance Manual
Color
Torque
0.181 Nm
Silver
(1.85 kgfcm)