Table of Contents
Advertisement
Field Remedy
Follow the following steps to replace the Cleaning Brushes that contact with the Duplex Right Roller and the
Duplex Outlet Roller and clean the relevant portions.
1. Remove the Registration Unit.
2. Open the Duplex Path.
3. Remove the 2 screws and release the claw to remove the Fixing Feed Cover 1.
4. Disconnect the connector, free the harness from the Wire Saddle, remove the 2 screws, and release
the protrusion to remove the duct on the right.
5. Disconnect the connector, free the harness from the 2 Harness Guides and the Wire Saddle, and
remove the 2 screws to remove the duct on the left.
pg. 250
Hide quick links:
Advertisement
Table of Contents
