Sntp Commands; Sntp Authenticate - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
The following shows sample output for the command when the detail keyword is
specified.
(Switch) #show clock detail
14:49:56 IST(UTC+5:30) Sep 23 2009
Time source is SNTP
Timezone configuration: static
Time zone:
Acronym is IST
Offset is UTC+5:30
Summertime:
Summer time is disabled
Related Commands
Command
sntp server
sntp client mode
clock date
clock timezone
show sntp
SNTP Commands
You can use the following commands to configure the switch to obtain its time
settings from an SNTP server.
sntp authenticate
Use this command to require server authentication for received Network Time
Protocol (NTP) traffic. To disable the feature, use the no form of this command.
sntp authenticate
no sntp authenticate
Description
Configures SNTP unicast servers.
Enables SNTP client mode and sets the mode to either
broadcast or unicast.
Sets the date and time manually.
Statically sets the offset to UTC, when the DHCP option is
not used.
Displays SNTP settings and status.
2
105
- Quick Links:
- Command Syntax
Hide quick links:
Advertisement
Table of Contents
