Dot1X Port-Control All - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Quick start manual (14 pages)
Table of Contents
Advertisement
Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Parameter
force-authorized
auto
Default
802. 1 X Port Control is enabled in auto mode.
Command Modes
Interface Config
Related Commands
Command
dot1x port-
control
show dot1x
dot1x port-control all
Use this command to enable the IEEE 802. 1 X operation on all the ports. Use the no
form of the command to reset the mode to the default value (auto).
dot1x port-control all {force-unauthorized | force-authorized | auto}
no dot1x port-control all
Description
The authenticator PAE unconditionally sets the controlled
port to authorized.
The authenticator PAE sets the controlled port mode to
reflect the outcome of the authentication exchanges
between the supplicant, authenticator and the
authentication server.
Description
Enables the IEEE 802. 1 X operation on all the port.
Shows a summary of the global 802. 1 X configuration,
summary information of the 802. 1 X configuration for a
specified port or all ports, the detailed 802. 1 X
configuration for a specified port, and the 802. 1 X statistics
for a specified port.
8
346
- Quick Links:
- Command Syntax
Hide quick links:
Advertisement
Table of Contents
