Poe Powered-Device Describe - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Administration
PoE
NOTE
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
poe powered-device describe
Use this command to add a comment or description of the powered device type
to enable the operator to remember what is attached to the interface. To remove
the description, use the no form of this command. This is applicable to powered
devices attached to the PSE ports on the switch.
The command can be used in Global Config mode to configure all ports and can be
used in Interface mode to configure a specific port.
poe powered-device describe pd-type
no poe powered-device describe
Syntax Descriptions
Parameter
pd-type
Modes
Global Config
Interface Config
Examples
The following example shows entering into Interface Config mode and adding a
description for port e1.
switch(config)#interface ethernet e1
switch(interface e1)#poe powered-device describe IP-phone
Command
show poe
show poe port
configuration
Description
The type of powered device attached to the interface. The
range is 1–24 characters.
Description
Displays the global configuration, and information about
each device connected to the PSE port(s).
Displays per-port PoE configuration.
2
46
- Quick Links:
- Command Syntax
Hide quick links:
Advertisement
Table of Contents
