Set Igmp Mcrtrexpiretime - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Quick start manual (14 pages)
Table of Contents
Advertisement
Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
show
igmpsnooping
set igmp mcrtrexpiretime
Use this command to set the Multicast Router Present Expiration time. The time is
set on a particular VLAN. This is the amount of time in seconds that a switch waits
for a query to be received on an interface before the interface is removed from the
list of interfaces with multicast routers attached. Use the no form of the command
to reset it to the default value. This timer is used only for dynamically identified
router attached ports.
set igmp mcrtrexpiretime vlan-id 0-3600
no set igmp mcrtrexpiretime vlan-id
Syntax Descriptions
Parameter
vlan-id
0–3600
Default
expiration time—0 (no expiration)
Command Modes
VLAN Config
Description
Displays IGMP Snooping information. Configured
information is displayed whether or not IGMP Snooping is
enabled.
Description
The ID of the VLAN to configure.
The expiration time. The range is 0–3600 seconds. A value
of 0 indicates an infinite time-out (no expiration).
7
306
- Quick Links:
- Command Syntax
Hide quick links:
Advertisement
Table of Contents
