Storm-Control Broadcast Level - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Port Management
Flow Control and Storm Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Default
Broadcast storm control is disabled.
Command Modes
Global Config
Interface Config
Related Commands
Command
storm-control
broadcast level
storm-control
broadcast rate
show storm-
control
storm-control broadcast level
This command enables and configures the broadcast storm recovery threshold for
an interface or on all interfaces as percent of port speed. If broadcast storm
recovery is active and the rate of Layer 2 broadcast traffic ingressing on an
interface exceeds the configured threshold, the traffic is dropped, limiting the rate
of broadcast traffic. In Global Config mode, the same percentage is set on all
ports.
Use the no form of command to reset it to the default value.
storm-control broadcast level 0-100
no storm-control broadcast level
Syntax Descriptions
Parameter
0–100
Description
Configures the broadcast storm recovery threshold for an
interface or all interfaces.
Configures the broadcast storm recovery threshold for an
interface or all interfaces.
Shows storm control configuration on a port or on all ports.
Description
The percentage of port speed, above which traffic is
dropped.
3
189
- Quick Links:
- Command Syntax
Hide quick links:
Advertisement
Table of Contents
