Table of Contents
Advertisement
Symptom
0108/0208/0209 Jam Code due to operation failure of the side registration motor
[Inspected by Canon Inc. ]
Description
0108/0208/0209 occurred when performing 2-sided copy/print.
- 0108: Duplex Merging Sensor Delay Jam
- 0208: Duplex Merging Sensor Stationary Jam
- 0209: Duplex Outlet Sensor Stationary Jam
Cause
The side registration detection flag on the paper path could not operate due to failure of the side registration
motor (M16) [2] in the duplex side registration sensor assembly, resulting in a jam. Even if the side
registration motor in the duplex side registration sensor assembly is not defective, the same symptom may
occur due to failure of the parts indicated below.
- The side registration sensor (PS31) [3]
- The side registration detection flag [4]
- The side registration slider [5]
Field Remedy
Check operation of the side registration motor (M16) by following the steps below. If the motor does not
operate properly, prepare the side registration motor (FK2-2069-000) and replace the motor. If the motor
operates properly but a jam occurs, check other factors.
1) Go to Service mode > Mode List > COPIER > Function > PART-CHK > Enter "5" to MTR and select the
side registration motor.
2) Go to Service mode > Mode List > COPIER > Function > PART-CHK > Select MTR-ON and press "OK"
button, then check the operation of the side registration motor. If an operation sound is heard after pressing
the OK button, the side registration motor (M16) operates normally and has no problem, so check other
factors. If the operation sound is not heard, go to the step 3), and check the side registration motor in the
pg. 197
Hide quick links:
Advertisement
Table of Contents
