Installing Memory Modules - Dell Precision Rack 7910 Owner's Manual
Hide thumbs
Also See for Precision Rack 7910:
- Owner's manual (142 pages) ,
- Quick start manual (2 pages) ,
- Setup manual (3 pages)
Table of Contents
Advertisement
Installing memory modules
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the cooling shroud.
4. Removing the cooling fan assembly.
NOTE:
The memory modules are hot to touch for some time after the system has been powered down. Allow the memory
modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components
or metallic contacts on the memory module.
Steps
1. Locate the appropriate memory-module socket.
CAUTION:
Handle each memory module only by the card edges, making sure not to touch the middle of the
memory module or metallic contacts.
2. If installed, remove the cooling fan assembly. For more information, see Removing the cooling-fan assembly.
3. If a memory module or a memory-module blank is installed in the socket, remove it.
NOTE:
Retain the removed memory-module blank(s) for future use.
CAUTION:
To prevent damage to the memory module or the memory-module socket during installation, do
not bend or flex the memory module; insert both ends of the memory module simultaneously.
4. Align the edge connector of the memory module with the alignment key of the memory module socket, and insert the
memory module in the socket.
NOTE:
The memory-module socket has an alignment key that allows you to install the memory module in the socket in
only one orientation.
CAUTION:
Do not apply pressure at the center of the memory module; apply pressure at both ends of the
memory module evenly.
5. Press the memory module with your thumbs until the socket levers firmly click into place.
26
Installing and removing system components
Safety
instructions.
After working inside your
system.
Advertisement
Table of Contents
Troubleshooting
