Installing A Hard Drive Into A Hard-Drive Carrier; Optical Drive (Optional); Removing The Optical Drive - Dell Precision Rack 7910 Owner's Manual
Hide thumbs
Also See for Precision Rack 7910:
- Owner's manual (142 pages) ,
- Quick start manual (2 pages) ,
- Setup manual (3 pages)
Table of Contents
Advertisement
Figure 10. Removing and installing a hard drive into a hard-drive carrier
a. screw (4)
b. hard drive
c. hard-drive carrier
Installing a hard drive into a hard-drive carrier
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
Steps
1. Insert the hard drive into the hard-drive carrier with the connector end of the hard drive toward the back.
2. Align the screw holes on the hard drive with the set of screw holes on the hard-drive carrier.
When aligned correctly, the back of the hard drive is flush with the back of the hard-drive carrier.
3. Attach the screws to secure the hard drive to the hard-drive carrier.
Optical drive (optional)
Removing the optical drive
Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
Steps
1. Disconnect the power/data cable from the back of the drive.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
31
Advertisement
Table of Contents
Troubleshooting
