Pcie Card Holder; Removing The Pcie Card Holder - Dell Precision Rack 7910 Owner's Manual
Hide thumbs
Also See for Precision Rack 7910:
- Owner's manual (142 pages) ,
- Quick start manual (2 pages) ,
- Setup manual (3 pages)
Table of Contents
Advertisement
2. If installed, remove the USB key.
3. Insert the new USB key into the USB connector.
Figure 14. Replacing the internal USB key
a. USB memory key
b. USB memory key connector
Next steps
1. Follow the procedure listed in After working inside your system.
2. While booting, press <F2> to enter the System Setup and verify that the USB key is detected by the system.
PCIe card holder
Removing the PCIe card holder
Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
3. If installed, remove the full-length PCIe card.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
CAUTION:
Do not use your system without the PCIe card holder installed. The PCIe card holder is necessary to
ensure proper system cooling.
Steps
1. Press the release tab and slide the card holder toward the back of the chassis to release the PCIe card holder from the
chassis.
2. Lift the PCIe card holder out of the chassis.
NOTE:
To ensure proper system cooling, you must replace the PCIe card holder.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
37
Advertisement
Table of Contents
Troubleshooting
