Troubleshooting Processors; Error Messages - Dell Precision Rack 7910 Owner's Manual
Hide thumbs
Also See for Precision Rack 7910:
- Owner's manual (142 pages) ,
- Quick start manual (2 pages) ,
- Setup manual (3 pages)
Table of Contents
Advertisement
NOTE:
When troubleshooting an expansion card, see the documentation for your operating system and the expansion card.
Steps
1. Run the appropriate diagnostic test. For more information, see
2. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
3. Remove the system cover.
4. Ensure that each expansion card is firmly seated in its connector.
5. Install the system cover.
6. If the problem is not resolved, turn off the system and attached peripherals, and disconnect the system from the electrical
outlet.
7. Remove the system cover.
8. Remove all expansion cards installed in the system.
9. Install the system cover.
10. For each expansion card you removed in step 8, perform the following steps:
a. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
b. Remove the system cover.
c. Reinstall one of the expansion cards.
d. Install the system cover.
e. Run the appropriate diagnostic test. For more information, see
Troubleshooting processors
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
Steps
1. Run the appropriate diagnostics test. See
2. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
3. Remove the system cover.
4. Ensure that the processor and heat sink are properly installed.
5. Install the system cover.
6. Run the appropriate diagnostic test. For more information, see
Error Messages
Errors That Halt the System Completely
The following is a list of BIOS error messages that will halt the system completely requiring you to cycle the system's power:
● Error! Memory configured incorrectly. Please enter Setup for Memory Information details
● Alert! Processor Cache Size Mismatch.
● Alert! Processor Type Mismatch.
● Alert! Processor Speed Mismatch.
● Alert! Incompatible Processor Mismatch.
92
Troubleshooting your system
Using System
Using System
Using System Diagnostics
Using System
Diagnostics.
Diagnostics.
for available diagnostic tests.
Diagnostics.
Advertisement
Table of Contents
Troubleshooting
